Skilhunt H04 High-CRI 5000K Samsung LH351D

Description

Any order containing lithium batteries could experience extended shipping delays, especially with the free shipping option which uses USPS First Class (1-20 days) or Priority Mail (1-20 days).  We recommend upgrading to UPS Ground if you can not take the risk of shipping delays. eBay shipping estimates are not accurate when shipping items with lithium batteries.
Skilhunt H04 High-CRI 5000K Samsung LH351D
________________________________________
Double UI
Mode group A, Keep the H03 main operation way.
Mode group B, Customized operation way with editable.
________________________________________
LED: Samsung LH351D 90 CRI 5000K
Max output:
ANSI 790 Lumens / 950 LED Lumens (LH351D)
Max runtime: Few months
Max beam distance: 123 meters
Max peak beam intensity: 3800cd
Waterproof: IPX-8
Impact-resistant: 1 Meter
Battery: 1×18650 , 2x CR123A , 2x RCR123A
Rated Range: 2.7V ~ 8.4V
Dimension:
Length 99.9mm / 3.93 inch
Head diameter 23.5mm / 0.93 inch
Body diameter 21.6mm/0.85 inch
Weight: 46g / 1.62oz (without battery)
Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring
________________________________________
Operation
1. Battery installation & Replace magnet: Insert the battery into the flashlight, the battery positive pole toward the light head.
Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on, the beam is directed away from the eyes.
When storing the light with Bankcards(magnetic) or Cell phone, you should replace the magnet with the rubber pad.
________________________________________
2. Turn ON/OFF & Mode transfer
Transfer Mode A / Mode B:
When headlamp is turned off without lockout, hold press side switch for 5 seconds, the light will flash three times fast, then flash three times slow.
________________________________________
Mode Group A
When the flashlight was OFF status:
Click the switch to memorized brightness level.
Quickly double click the switch to Turbo(T1/T2).
Quickly triple-click the switch to Strobe(S1) mode.
Press switch 0.5 seconds to Low(L1/L2) mode.
When the flashlight was ON(any mode) status:
Press and hold the side switch for 0.5 seconds to turn off.
Brightness & mode selection:
Brightness level:
Press side switch to Low-Mid-High-Turbo, cycle.
Quickly double press the side switch to Sub-level(i.e between L1 & L2), turn off memorized the last brightness.
Quickly triple press to Special modes.
Special modes:
Quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side switch back to previous brightness level.
________________________________________
Mode Group B
When the flashlight was OFF status:
Click the switch to memorized brightness level.
Press switch 0.5 sec, to L2.
Quickly double click switch to Turbo(T1) mode.
Quickly triple press to Special modes(S1).
When the flashlight was ON(any mode) status:
Click the switch to turn off.
On Common used levels(Editable):
Hold press switch, brightness levels automatic cycle, and selected mode by button released. Click the switch to turn off.
Quickly triple press enter to Edit levels.
On Special modes:
Quickly double click switch to transfer mode S1/S2/S3，click switch to turn off.
Hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high.
Quickly triple press to restore to the factory default flash modes.
________________________________________
Edit Levels:
— Support to 2 ~ 7 common used levels can be selected
–Enter to edit level, 7 levels circle automatically. The selected level, side switch indicator is on. Not selected brightness, side switch indicator is off.
–Factory’s default levels: L2-M2-H2-T2. The indicator light on synchronously when levels automatic cycles.
–Selected / Not selected brightness, Click side switch to turn on / off the corresponding indicator.
-. All selected finished, hold press 1 second the side switch save selected and quit edit mode. The light will be flash three times, and back to the lowest selected level.
-. Restore the factory default levels: Enter to edit level, then click side switch three times. (Light will be turned off after three clicks.)
________________________________________
Location indicator & Lock-out function
When turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click double click the switch to turn on/off the indicator, the indicator light flashes every second, locate the flashlight, Easily find the flashlight in the dark quickly. Press switch 1.5 sec, switch unlock, and enter into low mode.
________________________________________
Power indicator
Every time turn on, the side indicator will be light for 5 seconds to display the battery power.
Blink four times: battery power in 100%~80%;
Blink three times: battery power in 80%~50%;
Blink twice: battery power in 50%~20%;
Blink one time: battery power below 20%.
________________________________________
Features
1.
Super bright & latest
Samsung LH351D 90 CRI 5000K emitter
. High-Performance, High-Efficiency, and energy conservation.
U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beam shot, excellent structure, and temperature resistance.
d indestructible aluminum body with anti-scratching type III hard anodization
-level dissipating heat design and new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
switch button to transferring mode, user-friendly interface to adjust output.
mode groups plus editable brightness, more use options for choose.
input range provides more choices of batteries. High-efficiency driver circuit, no visible flash in any mode.
atic memory function, remember last used setting, and can be preset to specific output mode for instant access.
ligent temperature control technology for flashlight stable and safe use.
se polarity protection, to protect from improper battery installation.
turn off, hold press button to activate lockout function. Avoid light turn on by unexpected.
light is locked out, the location indicator will flash making it easy to find the light in dark.
tic tail, can be used on many special occasions, use as candlelight, etc.