P60 drop in 4X Cree XPG3 5K/4K CRI90 Solarforce Surefire 2.5-4.5V Input 18650

Description

Quad P60 drop in with a dual tint setup of Cree 5000K and 4000K CRI90 emitters mounted on a direct thermal path copper Mcpcb. Fet+1 driver featuring A6 firmware. Components are housed in a one piece aluminum module. Input voltage is 2.5-4.5, this will not work with multi CR123 setups. You will need to run a 14500,18350,18650,21700, or similar battery. Be sure your body will fit one of these batteries. Optic is a Carclo narrow spot. Max output is 2000+ lumens.
Firmware: A6-two mode groups, four or seven brightness levels
Module fits inside solarforce and surefire bodies. Some brands have different internal dimensions that vary slightly, I cant personally verify fitment in other brands. Do NOT use inside a KD host.
Drop-in comes inside a 35MM film container for storage. Copper tape is included for wrapping the drop-in. You must wrap the tape around the module until it fits tightly inside the host. This will ensure proper heat transfer away from the emitters and driver.