Lumintop GT Nano Titanium 450 Lumens EDC LED Flashlight

Description

NEW LUMINTOP GT NANO TITANIUM! NOT AVAILABLE TILL BEGINING OF MAY 2021
Please specify body finish please at check out buyer's notes. Thanks!
(7) RAW (POLISHED)
(7) STONEWASHED
(0) SAND BLASTED (SMOOTH MATTE FINISH) (SOLD OUT)
Specifications
Emitter:
OSRAM KW CSLNM1.TG LED, cold white, mounted on a COPPER DTP MCPCB
Flux:
~450 lm
Throw:
~300 m & ~23400cd
Firmware:
Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace
User interface:
[1] By default the GT Nano is set to use the very intuitive Narsil smooth
RAMPING
UI. Instant access to a 2.5A
TURBO
mode is also provided.
[2] A more conventional discrete level
MODE-SET
UI is available as an alternative.  Any one of 12  pre-defined mode-sets can be selected.
[3]
MOMENTARY
mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Battery:
One button-top 10180  Li-ion (included).
Driver:
Texas Avenger FET driver
Reflector:
20.8 mm ID, aluminum, smooth finish
Lens:
Glass with anti-reflective coating
Body:
Titanium alloy, polished, sandblasted, and stonewashed for options
Button:
Tactile with back-lit rubber boot
Ingress rating:
Equivalent to IPX-8, underwater 2m
Weight:
Approximately 103g without cells
Dimensions:
24 x 52.5mm
Charging the battery:  Remove the insulation sheet before the first use. The indicator shows red when the battery is connected. The charging indicator shows red when charging, and turns green when fully charged.
Notice: Extra 10180/10440 battery will load into a mini flashlight. Don't let it be fooled you